Gas Flows in Microsystems

International audienc

SIMULATION OF MICRODIODES

A brief presentation is given on the field of application of microfluidic devices, and their main properties are mentioned in the introduction. This paper deals with the numerical investigations of the viscous incompressible flow in micro devices using finite element modelling. After a validation of the numerical model for micro scale, the rectifying ability of different diffuser/nozzle elements is discussed. The variation of the diodes´ performances at different applied pressures and different diffuser angles is outlined

Investigations on acetone vapour photoluminescence for applications in molecular tagging techniques

International audienc

Molecular tagging velocimetry for confined rarefied gas flows: Phosphorescence emission measurements at low pressure

International audienceRarefied gas flows have a central role in microfluidic devices for many applications in various scientific fields. Local thermodynamic non-equilibrium at the wall-gas interface produces macroscopic effects, one of which is a velocity slip between the gas flow and the solid surface. Local experimental data able to shed light on this physical phenomenon are very limited in the literature. The molecular tagging velocimetry (MTV) could be a suitable technique for measuring velocity fields in gas micro flows. However, the implementation of this technique in the case of confined and rarefied gas flows is a difficult task: the reduced number of molecules in the system, which induces high diffusion, and the low concentration of the molecular tracer both drastically reduce the intensity and the duration of the exploitable signal for carrying out the velocity measures. This work demonstrates that the application of the 1D-MTV by direct phosphorescence to gas flows in the slip flow regime and in a rectangular long channel is, actually, possible. New experimental data on phosphorescence emission of acetone and diacetyl vapors at low pressures are presented. An analysis of the optimal excitation wavelength is carried out to maximize the intensity and the lifetime of the tracer emission. The experimental results demonstrate that a little concentration of about 5-10 % of acetone vapor excited at 310 nm or of diacetyl vapor excited at 410 nm in a helium mixture at pressures on the order of 1 kPa provides an intense and durable luminescent signal. In a 1-mm deep channel, a gas flow characterized by these thermodynamic conditions is in the slip flow regime. Moreover, numerical experiments based on DSMC simulations are carried out to demonstrate that an accurate measurement of the velocity profile in a laminar pressure-driven flow is possible for the rarefied conditions of interest

Computational study of a novel Knudsen pump design exploiting drilling and 3D printing techniques in low thermal conductivity materials

International audienc

Miniaturization of fluorescence sensing in optofluidic devices

International audienceSuccessful development of a micro-total-analysis system (μTAS, lab-on-a-chip) is strictly related to the degree of miniaturization, integration, autonomy, sensitivity, selectivity, and repeatability of its detector. Fluorescence sensing is an optical detection method used for a large variety of biological and chemical assays, and its full integration within lab-on-a-chip devices remains a challenge. Important achievements were reported during the last few years, including improvements of previously reported methodologies, as well as new integration strategies. However, a universal paradigm remains elusive. This review considers achievements in the field of fluorescence sensing miniaturization, starting from off-chip approaches, representing miniaturized versions of their lab counter-parts, continuing gradually with strategies that aim to fully integrate fluorescence detection on-chip, and reporting the results around integration strategies based on optical-fiber-based designs,optical layer integrated designs, CMOS-based fluorescence sensing, and organic electronics. Further successful development in this field would enable the implementation of sensing networks in specific environments that, when coupled to Internet of-Things (IoT) and artificial intelligence (AI), could provide real-time data collection and, therefore, revolutionize fields like health, environmental, and industrial sensing

Optofluidic Formaldehyde Sensing: Towards On-Chip Integration

International audienceFormaldehyde (HCHO), a chemical compound used in the fabrication process of a broad range of household products, is present indoors as an airborne pollutant due to its high volatility caused by its low boiling point ( T=−19 °C). Miniaturization of analytical systems towards palm-held devices has the potential to provide more efficient and more sensitive tools for real-time monitoring of this hazardous air pollutant. This work presents the initial steps and results of the prototyping process towards on-chip integration of HCHO sensing, based on the Hantzsch reaction coupled to the fluorescence optical sensing methodology. This challenge was divided into two individually addressed problems: (1) efficient airborne HCHO trapping into a microfluidic context and (2) 3,5–diacetyl-1,4-dihydrolutidine (DDL) molecular sensing in low interrogation volumes. Part (2) was addressed in this paper by proposing, fabricating, and testing a fluorescence detection system based on an ultra-low light Complementary metal-oxide-semiconductor (CMOS) image sensor. Two three-layer fluidic cell configurations (quartz–SU-8–quartz and silicon–SU-8–quartz) were tested, with both possessing a 3.5 µL interrogation volume. Finally, the CMOS-based fluorescence system proved the capability to detect an initial 10 µg/L formaldehyde concentration fully derivatized into DDL for both the quartz and silicon fluidic cells, but with a higher signal-to-noise ratio (SNR) for the silicon fluidic cell ( SNRsilicon=6.1 ) when compared to the quartz fluidic cell ( SNRquartz=4.9 ). The signal intensity enhancement in the silicon fluidic cell was mainly due to the silicon absorption coefficient at the excitation wavelength, a(λabs=420 nm)=5×104 cm−1 , which is approximately five times higher than the absorption coefficient at the fluorescence emission wavelength, a(λem=515 nm)=9.25×103 cm−

Self-ordered particle trains in inertial microchannel flows

Controlling the transport of particles in flowing suspensions at microscale is of interest in numerous contexts such as the development of miniaturized and point-of-care analytical devices (in bioengineering, for foodborne illnesses detection, etc.) and polymer engineering. In square microchannels, neutrally buoyant spherical particles are known to migrate across the flow streamlines and concentrate at specific equilibrium positions located at the channel centerline at low flow inertia and near the four walls along their symmetry planes at moderate Reynolds numbers. Under specific flow and geometrical conditions, the spherical particles are also found to line up in the flow direction and form evenly spaced trains. In order to statistically explore the dynamics of train formation and their dependence on the physical parameters of the suspension flow (particle-to-channel size ratio, Reynolds number and solid volume fraction), experiments have been conducted based on in situ visualizations of the flowing particles by optical microscopy. The trains form only once particles have reached their equilibrium positions (following lateral migration). The percentage of particles in trains and the interparticle distance in a train have been extracted and analyzed. The percentage of particles organized in trains increases with the particle Reynolds number up to a threshold value which depends on the concentration and then decreases for higher values. The average distance between the surfaces of consecutive particles in a train decreases as the particle Reynolds number increases and is independent of the particles size and concentration, if the concentration remains below a threshold value related to the degree of confinement of the suspension flow

Editorial for the special issue on gas flows in microsystems

International audienceThe last two decades have witnessed a rapid development of microelectromechanical systems (MEMS) involving gas microflows in various technical fields. Gas microflows can, for example, be observed in micro heat exchangers designed for chemical applications or for cooling of electronic components, in fluidic microactuators developed for active flow control purposes, in micronozzles used for the micropropulsion of nano-and picosatellites, in micro gas chromatographs, analyzers or separators, in vacuum generators and in Knudsen micropumps, as well as in some organs-on-a-chip such as artificial lungs